Special mission anti-acid clothing

   With respect to the Xinke antistatic fabric , Xinke acid free fabric seem to have a more specific mission, it requires to be high on the production. To meet the national standard level
Anti-acid washing clothes should try to use simple methods , do not shuffle and other clothing . Breathable acid resistant overalls preferably neutral or
Weakly alkaline detergent wash by hand or washing machine soft , do not use bleach , organic solvents decontamination, washing temperature should be below 40 ℃, clothes
Should dry naturally in the shade , avoid sun exposure in the state semi 's , best ironing with an iron 115 ℃ about it, it can be
To some extent slowed decline in anti- acid capacity. Airtight type anti- acid overalls should normally be flush with water , use a soft brush
Gently scrub the dirt , avoid using hot water, an organic solvent cleaning , avoid sun exposure , baking, ironing, avoid aging , cracking , melting
Inflation and lose the protective properties ; avoid folding clothes when anti-acid preservation , you can hang up and stored in a dry and ventilated , away from heat sources , from a
Cut heating element 1m away. Tape and plastic overalls airtight type anti- acid storage should avoid high temperature , sunlight , for folding , should sprinkle
Talcum powder to prevent adhesions. Anti-acid clothes during transport must be covering above .

Use anti-static clothing and precautions

1, all in the normal case, the explosive gas mixture is continuously emerge frequent short breaks and the presence of explosive gas mixtures may occur long spaces. Combustibles minimum ignition energy is very small, should wear anti-static clothing.
2, prohibits flammable and explosive off the Xinke antistatic fabric.
3, prohibit additional or wear any metal objects on the anti-static clothing.
4, wear anti-static clothing, anti-static shoes should also be told to use a piece.
5, anti-static clothing to keep clean and maintain anti-static properties. After use with a soft brush, scrub with a soft cloth
6, after wearing for some time, to deal with anti-static clothing can be tested, if the static performance does not meet the standard requirements, you can not use an anti-static overalls.

Anti-static clothing fabrics

Antistatic suit is made by special anti-static clean fabrics. This fabric adopts the special-purpose polyester filament and warp or weft inserting weave conductive fiber. With high efficiency, permanent anti-static, dust, thin slippery, textured clear characteristics. Used in the process of making clothing specialized overlock sewing machine (machinery, effectively reduce the generation of particles. Not dropping viscosity cingulate dust-free environmental pollution. According to the level required to provide different design, and USES the conductive fiber sewing, keep clothing part electrical continuity; Sleeves trousers for double layer structure, the inner use conductive or antistatic rib, so as to meet the requirements of high level dust-free environment.

Relative humidity of 30%, or less pure cotton-padded jacket with power under the condition of relatively and chemical fiber, in high voltage electric place should be the conductor material made of antistatic clothing; Wear off in inflammable and explosive places; Banned in anti-static clothing attached or carry any metal objects; Use anti-static clothing, it must be matched with that stipulated in the GB4385 anti-static shoes to wear

Anti-static characteristics

Antistatic ultra-clean fabrics used in the anti-static clothing is often referred to as "conductive silk". Actually this kind of view is not tight, conductive fabrics according to its own technical characteristics can be divided into suitable for antistatic (ESD), and is suitable for the Clean Room (Clean Room), only suitable for Clean Room of conductive fabrics can be antistatic ultra-clean fabrics.

What is a anti-static fabrics? After anti-static processing of fabrics can be referred to as Xinke antistatic fabric. Anti-static fabric processing method usually include:

(1) the fabric with antistatic finishing agent for finishing;

(2) in order to improve the fabric moisture absorption fiber grafting modification, for the purpose of the hydrophilic fiber blended and interwoven;

(3) blended or embedded weave conductive fiber;

The difference between positive and negative of flame retardant fabric

1. General fabric side decorative pattern, colour and lustre are better than the other clear and beautiful.
 2. The flame retardant fabric has the special view of the fabric and fabric color decorative pattern, its facade pattern must be clear and pleasing to the eye.
 3. The flame retardant fabric convex and concave and convex fabric, positive close and exquisite, has the strip or design in relief; And the reverse is rough, have long long term.
4. Terry fabrics: single pile fabric, plush side is positive. Double pile fabric, the nap is bright and clean, neat the positive side of the fabric.
5. Observe the flame retardant fabric edge, edge is bright and clean, neat the positive side of the fabric.
6. Double, multi-layer fabric, such as warp/weft density of both the front and at the same time, the general positive will have larger density or positive materials better.
7. Leno: texture clear, ground by prominent side is positive.
8. Towel fabric: loop density big side is positive.
9. Printed fabric, pattern clear, colour and lustre is a bright side as positive.
10. The whole piece of fabric: in addition to the export products, anyone who has manual paste (trademark) and stamped with the factory JianYanZhang is usually opposite. Most fabric, its front opposite a significant difference between the two, but there are a lot of the face of positive and negative of fabrics are very similar, both surfaces can be used, so for this kind of fabric is not importune difference between the positive and negative.

What is a flame retardant cloth?

Flame retardant fabric is not really doesn't work, just leave immediately after the flame, flame retardant fabric flame retardant fiber and finishing two kinds. Flame retardant finishing fire retardant is divided into one-time and durability of two kinds.

Usually we think of flame retardant cloth, in everyone's impression is not the burning, but it is not, in fact and not on fire, flame retardant cloth only after leaving the flame will be out soon. Have a corresponding standard of flame retardant, such as: en470-1, en531, en532, nfpa2112, nfpa70e, etc.

Flame retardant fabric fiber flame retardant and finishing two kinds, flame retardant finishing fire retardant is divided into one-time and durability of two kinds.

Flame retardant fiber, also called permanent flame retardant fabric, it is in the whole system of the early stage of the process work, mainly adopts the flame retardant fiber woven fabric with flame retardant effect is permanent, generally can be maintained more than 50 times the wash, good washing effect, especially the use of flame retardant system of polypropylene yarn (polyacrylic, commonly known as acrylic), in case of fire or curled, carbonation, fire is extinguished on leaving, not can't afford to drop black smoke, won't produce secondary fire. It is usually used in the clothing surface fabric.

One-time flame retardant fabric is common after a flame retardant in the later dyeing processing, its biggest weakness is flame retardant effect disappear or apparent recession after washing, we usually used in some washing fewer occasions, such as hotel curtain, etc.

Durability of flame retardant fabrics usually adopt "Plutarch benzene (proban)" production process, the use of flame retardant is a kind of used for the durability of cotton fiber and its blended fabric finishing fire retardant, its main characteristic is to use this kind of flame retardant after finishing production, within the fabric in the washing can be 50 times has good flame retardant ability.

The three initial flame retardant performance is little different, just wash one-off flame retardant fabric flame retardant performance completely disappear.